Consider the constant abuse that your wood floors take: high heels, pet nails, children’s toys, and shifting furniture, to name a few. Even though wood floors are durable, their finish is susceptible to scratches and scuffs.
Sanding floors completely to apply a new surface finish is an expensive process that should only be done every few decades.
However, polishing the floor with a product designed specifically for your floors is a simple and inexpensive way to restore shine, even out imperfections, and extend the life of your beautiful hardwood. To obtain the right look, all you need is a flat-head mop with a microfiber cleaning pad and commercial wood floor polish in low- or high-gloss sheens.
The finish of your floors, however, will determine whether you should polish them. Polish will advantage floors with a defensive surface, such as a waterproof barrier like urethane, but wax is required for floors with penetrating finishes like tung oil or unsealed wood. Using the incorrect product can result in a variety of issues, such as making the floors too slick, dulling the finish, and impeding future refinishing.
Some Steps How to polishing wood floor
Allow at least a day before restoring the room
Allow at least one hour for light traffic through the room and a full day before moving your stuff back in and resuming normal use. To gently remove, avoid dragging or sliding furniture; instead, pick up each piece and place it where it belongs. For added protection, the place felt furniture pads beneath heavy pieces.
Examine the finish on your wood floors
Unless you are doubtful about the finish on your floor, scratch a small amount off in an unassuming area with a sharp knife blade.
- Your floor most likely has a piercing finish if the finish is damaged but no clear material is scuffed. Stop below; these wood floors should only be waxed.
- If you see a transparent material, your flooring most likely has a surface finish. These wood floors are safe to polish. However, before tackling the entire floor, test the polish in a small hidden or imperceptible area of the wood.
Remove dust and dirt from your wood floors
Unused the room by trying to remove as much furniture as possible, and then deep clean the floor to consider removing dust and dirt. Sweep or vacuum the floor, then mop with a commercial wood floor cleaner or a solution of quarter-cup dish soap and a gallon of warm water to remove any remaining grime. To extract any cleaner stains, make a final pass over the floors with a clean, ocean mop. Using a soft, clean towel, totally dry the dish.
Polish wood floors to a gleaming sheen
Starting in the back corner of the room by pouring a small S-shaped amount of wood floor polish onto the floor and following a path that will lead you to an exit.
Work the solution back and forth in the position of the wood grain with a flat-surface mop, smoothing out any air bubbles. To best control the level of polish you have applied, work more closely in areas.
Because when you must ensure that the floor is fully covered, thin layers will dry faster than thick ones, and you can always apply another coat if necessary.
Hire a reputable certified polishing floor near you
Now that you know what to look for during a polishing floor, you are ready to contact a reputed and reliable polishing floor in your area. When you hire them, they will give you an honest evaluation of your polishing floor.
Moreover, how do you locate a reputable polishing floor service? It only takes asking the right questions and receiving the right answers.
How do you polish a floor at home?
Ans: Begin with a squirt bottle, which is empty. 2 tablespoons olive oil, followed by 1 tablespoon distilled white vinegar Add 2 cups of warm water on top, then shake it up to ensure everything is well combined.
How often should you polish wood floors?
Ans: You should polish your hardwood floors every 2-4 months to keep them fresh gleaming and presentable. Floor polish fills in scuffs while also protecting the finish from future damage and over-cleaning. You should sweep your floors thoroughly before polishing them, as well as once a week.
How do you make a spray buff solution?
Ans: 1. Fill a spray bottle halfway with the floor finish for your specific type of floor, whether it is wood, tile, marble, or something else.
- Fill the bottle to the brim with distilled water.
- To combine the two liquids, vigorously shake the bottle.
- Using a soft cloth, buff away the solution.