Whether you are thinking about floorboards sanding in a single room or tackling a whole-house renovation, you have come to the right place for expert advice.
Nothing beats beautifully sanded and polishing floor, especially in a restored, grand old Queenslander. There are numerous advantages to hiring a professional to sand your floorboards, including getting the best possible results and adding immediate value to your home. Of course, there is something incredibly satisfying about doing the job yourself.
If you consider yourself handy and have the time, patience, and physical ability to tackle this difficult task, you should consider sanding your own floorboards.
Some Floorboard Sanding Techniques
Preparation is key
This point cannot be overstated when sanding floors. The more time you spend preparing, the less stress and mess you will have when you begin your project.
Some tips for preparing your project area:
- Take out all of the furniture from the room.
- Have your entire tools ready in the room or close by.
- Use a nail punch to punch down all of the nail heads below the floor surface.
- Make sure you have all of your safety equipment and that you are wearing your PPE (personal protective equipment)
- Do not rush the job; instead, take your time for the best results.
- Recognize that sanding floorboards is a physically demanding task and budget for extra time to take breaks throughout.
- Always keep plenty of drinking water on hand.
- Open windows with caution – fresh air is important, but a strong draft will stir up dust and blow it around.
Selecting the right equipment
When it comes to sand a floor, choosing the right tools can make or break your project. The equipment you choose will also assess how long and difficult your project will be. While DIY sanding is generally about saving money, invest in the best hire equipment your budget will allow, which will help reduce the physical effect.
The following tools are recommended for the better effect on your wood floors:
- A big floor sander for the main floor.
- An edge sander for stairwells and corners
- A range of large and small grit sandpaper (from 40 grit to 120 grit) for various stages of the job
- A hammer and a nail punch
Clean as you go
Dust is produced when sanding floorboards. To avoid a major build-up at the end, clean up as much dust as possible all through the sanding system. This also helps to keep dust contained rather than spreading throughout your home.
The majority of edge sanders are belt sanders with a built-in dust extraction feature. This will help to reduce dust and is a good option to look for if you are hiring.
The final clean-up should be meticulous before proceeding with the polishing of your floorboards. As the dust settles, you may need to clean the area more than once.
When you are finished cleaning, give the floor a good wipe down with a cloth soaked in white spirit. This will remove any excess resin from the wood and degrease the floor in preparation for polishing.
Hire a reputable certified Floorboard Sanding near you
Now that you know what to look for during floorboard sanding, you are ready to call reputable floorboard sanding in your area. When you hire them, they will provide you with an honest assessment of your floorboard sanding.
However, how do you find a good floorboard sanding service? It all comes down to asking the right questions and receiving the right answers.
We will tell you that the best floorboard sanding in Melbourne is uniting floors.
